Home
Setup guide
Install and connect your Security Center SaaS application.
Device management
Intrusion
Common setup tasks
Synchronizing the time on a Bosch intrusion panel with Bosch RPS
To ensure that intrusion events are recorded with accurate timestamps, administrators must synchronize the time on intrusion panels with the time set in Bosch RPS.

Pre-deployment guide
Review requirements, order, and activate your Security Center SaaS system.
Setup guide
Install and connect your Security Center SaaS application.
- Getting started
- User management
- Device management
  - Appliances
  - General tasks
  - Video
  - Access Control
  - Intrusion
    - Overviews
    - Concepts
    - Common setup tasks
      - Configuring the communications settings of the Genetec Intrusion Protocol
        To adjust how intrusion panels communicate with Security Center SaaS, you can modify the Genetec Intrusion Protocol's default communication settings.
      - Configuring Honeywell Galaxy Dimension panels to communicate with Security Center SaaS
        To enable communication between a Honeywell Galaxy Dimension panel and Security Center SaaS, configure the panel access over Ethernet using the Galaxy RSS application.
      - Configuring Honeywell Galaxy Flex panels to communicate with Security Center SaaS
        To enable communication between a Honeywell Galaxy Flex panel and Security Center SaaS, configure the panel access over Ethernet using the Galaxy RSS application.
      - Adding Honeywell Galaxy intrusion panels
        To monitor, control, and report on a Honeywell Galaxy intrusion panel in Security Center SaaS, you must add it to a Genetec Cloudlink appliance.
      - Synchronizing the time on a Honeywell Galaxy intrusion panel with a Genetec Intrusion Bridge
        To ensure that intrusion events are recorded with accurate timestamps, administrators must synchronize the time on intrusion panels with the Genetec™ Intrusion Bridge that the panel connects to.
      - Preparing a Bosch intrusion panel to add to Security Center SaaS
        To add a Bosch intrusion panel to Security Center SaaS, configure the panel settings and record the panel's IP address, port number, and automation passcode required to add the panel to the system.
      - Adding a Bosch intrusion panel
        To monitor, manage, and report on a Bosch intrusion panel in Security Center SaaS, add the panel to a Genetec Cloudlink™ appliance.
      - Configuring Bosch intrusion panel settings
        To ensure synchronization between Security Center SaaS and your Bosch intrusion panel, configure the panel settings in your system to match the settings configured on the physical panel.
      - Synchronizing the time on a Bosch intrusion panel with Bosch RPS
        To ensure that intrusion events are recorded with accurate timestamps, administrators must synchronize the time on intrusion panels with the time set in Bosch RPS.
      - Adding input pins and output relays to maps
        To enable operators to monitor intrusion input states and trigger output actions directly from maps, add input pins and output relays to maps in Genetec™ Configuration.
      - Adding intrusion detection areas to your maps
        To enable operators to monitor and control intrusion detection areas, you can add the areas to maps in Genetec™ Configuration.
      - Adding intrusion detection areas as shapes on maps
        To enable operators to visualize intrusion detection areas and monitor state changes, add intrusion detection areas to your maps as shapes.
      - Creating intrusion areas manually
        If the intrusion detection areas weren’t automatically created after the intrusion detection unit was enrolled, you must create them manually to enable arming, disarming, and other actions.
      - Assigning cameras to intrusion detection areas
        To retrieve video footage related to intrusion events, you must assign cameras to intrusion detection areas.
      - Importing intrusion panel cardholders into Security Center SaaS
        Import existing intrusion panel cardholders to create Security Center SaaS cardholder records that can be managed centrally.
      - Adding Security Center SaaS cardholders to a Genetec Intrusion Bridge
        Before granting a cardholder access to an intrusion panel, you must add them to the Genetec™ Intrusion Bridge associated to the panel.
      - Granting Security Center SaaS cardholders access to a Honeywell Galaxy intrusion panel
        To grant a cardholder access to a Honeywell Galaxy intrusion panel, you can add them to the panel in Genetec™ Configuration.
      - Granting Security Center SaaS cardholders access to a Bosch intrusion panel
        To grant a cardholder access to a Bosch intrusion panel, you can add them to the panel in Genetec™ Configuration.
      - Removing cardholders temporarily from an intrusion panel
        To temporarily revoke a cardholder's or cardholder group's access to an intrusion panel, you can temporarily remove them from the panel configuration.
      - Removing cardholders from an intrusion panel
        If a cardholder no longer requires access to an intrusion panel, you can delete them from the panel in Genetec™ Configuration.
      - Assigning cameras to inputs
        By linking cameras to inputs, the video footage associated with an intrusion event can be displayed and reviewed in Security Center SaaS.
    - Managing intrusion panels
    - Device and manufacturer considerations
    - References
  - Intercoms
  - Software and firmware updates
- System automation
- Map design
User guide
Perform daily operations and monitor your facilities in the Security Center SaaS application.
Genetec ClearID
Set up and use ClearID in Security Center SaaS.
Federation
Set up and use Federation in Security Center SaaS.
Appliances
Install, configure, and use your cloud-managed appliances.
Troubleshooting
Get quick and easy access to troubleshooting content for Security Center SaaS.
Supported devices
Review the supported devices list.
Supported features
Review the supported features list.
Technical support
Learn how and where to find support to help you solve technical issues.
Glossary

Synchronizing the time on a Bosch intrusion panel with Bosch RPS

2026-10-02

To ensure that intrusion events are recorded with accurate timestamps, administrators must synchronize the time on intrusion panels with the time set in Bosch RPS.

Before you begin

Add your Bosch intrusion panel in Security Center SaaS.

What you should know

Security Center SaaS doesn't support time synchronization between Bosch intrusion panels and the Genetec™ Intrusion Bridge.

Procedure

From the Genetec™ Configuration homepage, open the Intrusion detection task.
From the entity browser, select the intrusion panel that you want to synchronize with the Bosch RPS.
Open the Properties page.
Select the Sync unit time setting.
In the Interval in minutes field, enter the frequency at which the panel should synchronize its time with the Bosch RPS.
Click Apply.

The intrusion panel keypad displays the time from the Bosch RPS.

After you finish

Configure the Time zone setting on the Location page of the intrusion panel. This setting defines the time that Security Center SaaS uses to display intrusion events in the Reports, Tiles, and Maps tasks.