Home
Setup guide
Install and connect your Security Center SaaS application.
Device management
Adding devices
To add your devices you can scan a QR code, enter the information manually, or automatically discover devices on the local network.

Pre-deployment guide
Review requirements, order, and activate your Security Center SaaS system.
Setup guide
Install and connect your Security Center SaaS application.
- Getting started
- User management
- Device management
  - Adding devices
    To add your devices you can scan a QR code, enter the information manually, or automatically discover devices on the local network.
    - Adding Genetec Cloudlink appliances
      After initially starting a Genetec Cloudlink™ appliance and connecting it to the network, you must add it to Security Center SaaS before it becomes operational.
    - Adding Synergis Cloud Link appliances
      After you’ve connected to your Synergis™ Cloud Link appliance for the first time, add it to Security Center SaaS before using it.
    - Adding Axis direct-to-cloud cameras
      Before you can view, record, and upload video to Cloud Storage, you must add your Axis direct-to-cloud (D2C) cameras in Security Center SaaS.
    - Adding Bosch direct-to-cloud cameras
      Before you can view, record, and upload video to Cloud Storage, you must add your Bosch direct-to-cloud (D2C) cameras in Security Center SaaS.
    - Adding i-PRO direct-to-cloud cameras
      Before you can view, record, and upload video to Cloud Storage, you must add your i-PRO direct-to-cloud (D2C) cameras in Security Center SaaS.
    - Adding Axis Powered by Genetec devices
      After unpacking and connecting the Axis Powered by Genetec device to your company LAN, you must add the device to Security Center SaaS before it can be used.
  - About firmware updates for access control appliances
    To keep your access control appliances secure and up to date, you must install the latest firmware.
  - Updating camera capabilities manually
    To take advantage of new camera features as they become available, you can manually update camera capabilities. This is useful when a system integrator or end-user changes the camera configuration or when features are added after camera enrollment.
  - Filtering and sorting devices
    To facilitate device management, you can filter and sort devices by specific criteria on the Devices page in Genetec™ Configuration.
  - Deleting devices
    Delete a device that is no longer required or is in an error state, or delete a device to enroll it again.
  - About recording profiles
    A recording profile is a configuration for multiple cameras containing predefined camera settings, including settings for retention period, storage location, resolution, frame rate, and bit rate.
  - Adding recording profiles
    To remove friction during large-scale camera deployments and for consistent configurations across multiple cameras, you can use recording profiles to specify video, storage, and retention settings.
  - Configuring custom camera settings
    You can create a custom settings configuration to manage camera-specific settings, which removes any association with a recording profile.
  - Configuring sensor-specific custom camera settings
    You can create a custom settings configuration to manage settings for individual sensors on a multisensor camera, which removes any association with a recording profile.
  - How fisheye cameras work in Security Center SaaS
    Security Center SaaS supports the enrollment of fisheye cameras and can dewarp live and playback video from direct-to-cloud and managed Archiver cameras.
  - How privacy protection works in Security Center SaaS
    In Security Center SaaS, privacy protection anonymizes video by pixelating parts of a video stream where movement is detected. The identity of individuals or moving objects is protected, without obscuring movements and actions or preventing monitoring.
  - How events work in Security Center SaaS
    An event is a record of an activity or incident that occurred in the system. Security personnel can monitor events in real time and investigate them later. Events can also trigger automations in the system.
  - Adding Bosch intrusion panels
    To monitor, control, and report on a Bosch intrusion panel, you must add it to a Genetec Cloudlink™ appliance in Security Center SaaS.
  - Configuring Bosch intrusion panel settings
    If you modify the settings on a Bosch intrusion panel, you must update the corresponding settings in Genetec™ Configuration web to ensure proper synchronization.
  - Configuring advanced settings on intrusion panels
    After you add an intrusion panel in Genetec™ Configuration web, you can configure its advanced settings in Genetec Configuration desktop.
  - Enabling intrusion panel monitoring
    To enable operators to monitor an intrusion panel in Genetec™ Operation, you must add the intrusion panel entities to maps.
User guide
Perform daily operations and monitor your facilities in the Security Center SaaS application.
Genetec ClearID
Set up and use ClearID in Security Center SaaS.
Federation
Set up and use Federation in Security Center SaaS.
Appliances
Install, configure, and use your cloud-managed appliances.
Supported devices
Review the supported devices list.
Supported features
Review the supported features list.
Technical support
Learn how and where to find support to help you solve technical issues.
Glossary

Adding devices

2025-05-21

To add your devices you can scan a QR code, enter the information manually, or automatically discover devices on the local network.

Procedure

In Genetec™ Configuration web, select Devices from the left sidebar, and click Add device.
Do one or more of the following:

After you finish

(Optional) If you want to manage multiple direct-to-cloud cameras using recording profiles, refer to the following: